Reset Router Belkin f5d8236-4

How to reset router Belkin f5d8236-4

Reset Router Belkin f5d8236-4

Guide or tutorial to reset router Belkin F5D8236-4

Locate the reset hole with button on the back of the router. (see the next picture)
Reset Belkin router soft and hard
Leave the router powered on to reset Router Belkin F5D8236-4.
Use a paperclip (or similar) to press and hold in the reset button for 10-15 seconds, release the button. Wait approximately one minute for the router to restart.

Specification Router Belkin F5d8236-4

Standards IEEE 802.3/3u, IEEE 802.11b/g, IEEE802.11n Draft 2
Security Wi-Fi Protected Setup; 256-bit WPA/WPA2 Personal; 64-bit, 128-bit WEP encryption WPA/WPA2 WPA2
Ports 4 x 10/100M
Wireless Data Rates Up to 300Mbps
Operating Range Up to 1200 feet
Antenna External Antenna
Interface Ethernet Port
VPN support PPTP; IPSec pass-through

Question about reset router Belkin F5D8236-4 ? leave a message

Reset Nokia C3-01

How to reset Nokia C3-01 mobile phone

How to reset Nokia C3-01
In case your Nokia C3-01 meet a permanent problem, you need to reset your mobile phone. Right now there are a pair of methods to be able to execute a reset on the device, the soft reset and hard reset Nokia C3-01.

How to perfom a hard reset on Nokia C3-01

To complete a hard reset on the Nokia C3-01, press *#7370# and press Dial. Your cellphone will probably ask for the security code that is 12345 by default. Considering that the hard reset will certainly remove all data in your telephone, you need to back up crucial data just before executing a hard reset.

How to perfom a soft reset on Nokia C3-01

When you need to soft reset your Nokia C3-01, you need to press *#7780# and then press Dial. The standard security code is 12345. When you do this, your cellular phone may come back again to original factory status, however you will not necessarily loose personal data. It is better to generate a backup previous to executing any kind of reset.

Nokia C3-01 specifications

Quad band EGSM 850/900/1800/1900
WCDMA 850/900/1900/2100
Series 40 6th edition
Firmware update over the air (FOTA)
Speech codecs: HR, FR, EFR
Size: 111 x 47.5 x 11 mm
Weight (with battery): 100 g
Screen size: 2.4″
Resolution: 240 x 320
Up to 262,000 colours
Resistive touch screen
BL-5CT 1050 mAh Li-ion battery
2G Standby time:405 hours and Talk time: 5 hours 30 mins
3G Standby time:440 hours and Talk time: 4 hours
Music playback: up to 20 hours
5 megapixel camera (2592 x 1544 pixels)
LED flash
Extended depth of focus (EDOF)
Zoom up to 4x (digital)
Fullscreen viewfinder
Still image format: JPEG
Noise reduction

 

If you have question about reset nokia C3-01 leave a mesagge

Posted in Reset Nokia by administ. 4 Comments

Reset Philips 14PT6107/05 multi region

How to Reset Philips 14PT6107/05 Multizone

Reset Philips 14PT6107/05 multiregion free

Guide to reset Philips 14PT6107/05 TV Dvd player Multiregion or multizone.

How to unlock or resetPhilips 14PT6107/05 multizone or multiregion

Enter 062596 on remote control
Within 6 or 7 secs press Menu , Service Menu appear and select DVD, press Enter
Now you hace to options to make region free:
Option 1: Use right button to select region “All”
Now press Menu 3 times to exit.

Option 2: Type 00 and press OK, Then Menu 3 times.
Go in to Standby and power Back up.

Philips 14PT6107/05 specifications

Plays Cd, DVD, JPEG and MP3
Integrated DVD mechanism watch DVD movies without other devices or cables
2 x 3 watt RMS power output
Sharpness adjustment feature for better image definition
Includes stereo AV and headphone jacks
Euro A/V connector (SCART connector)
 

Do you have questions about Reset Philips 14PT6107/05 Multiregion ? leave a comment

Reset Roadstar DVD-504 PSPKR Multiregion

How to Reset Roadstar DVD-504 PSPKR Multizone

How to reset Rooadstar DVD-504 PSPKR multzone

Guide to reset Roadstar DVD-504 PSPKR Dvd player Multiregion or multizone.

How to unlock or reset Roadstar DVD-504 PSPKR multizon or multiregion

Open the disc tray and press VOL+ for 4 secs
Press LANGUAGE
Select RC (0=codefree) and press ENTER
Close the disc tray and the Roadstar DVD 504 is ready and region free!

 

 

Do you have questions about Reset Roadstar DVD-504 PSPKR Multiregion ? leave a message

Vizio TV service mode

How to enter Vizio TV service mode ?

 
Vizio Service menu

 

Get into the Vizio TV service mode

There are to options to get into Service mode:
Option 1:
Turn the Vizio TV off.
Press and hold the CH + & CH – buttons on the TV.
Then press and release the POWER button on the TV Vizio.
Release the CH+ & CH- buttons.
Now press the MENU button on the remote.
You should get your regular menu up, but with a “F” in the bottom right corner of the menu (This if for factory reset).
Press and hold the MENU button for few seconds.
The Service Menu will be displayed.

Option 2:
Turn off th Vizio TV.
Press and hold the CH+ & CH- buttons on the TV Vizio.
Then press and hold the POWER button on the TV.
Keep all three buttons pressed for few seconds.
Now press the MENU button on the remote.
You should get your regular menu up, but with a “F” in the bottom right corner of the menu (This if for factory reset).
Press and hold the MENU button for few seconds.
Service Menu will be displayed.

Question about reset Vizio TV service mode ? leave a message or a comment

Sharp CRT TV service mode

How to enter Sharp crt TV service mode ?

Sharp CRT TV service mode

Get into the Sharp Crt TV service mode

Unplug the Sharp television.
Press and hold the VOL- & CH+ buttons.
While holding the above buttons, plug in the Sharp TV.
The TV will turn on with the Service Menu displayed.

To navigate use CH+ CH- buttons, Use VOL+ VOL- buttons to adjust the value.

 

Question about reset Sharp CrtTV service mode ? leave a comment

Sony TV service mode

How to enter Sony TV service mode ?

 

Sony TV service mode

Get into the Sony TV service mode

First power off your Sony television using remote, then Press Display + 5 + Vol Up + Power button simultaneously on remote.

Question about reset Sony TV service mode ? leave a message

Tags:
Posted in Reset Sony TV Television by administ. No Comments

Pioneer Plasma TV service mode

How to enter Pioneer Plasma TV service mode ?

Pioneer Plasma TV service mode

 

Get into the Pioneer Plasma TV service mode

Plasma Pioneer 3rd Generation Models procedure:
Make sure the set is in standby
Hold down INPUT + VOL+ buttons on the panel.
Turn on the Plasma Pioneer at the panel.
The service menu will come up.

 

Plasma Pioneer 4th / 5th / 6th / 7th Generation Models:

Make sure the Plasma and the Media Box are in standby.
Using the remote control, Press DISPLAY button (only press, do not hold) and wait 5 seconds.
Press {LEFT + UP + LEFT + RIGHT + POWER buttons.
The Pioneer Plasma will turn on and be in the service menu.

Question about reset Pioneer Plasma TV service mode ? leave a message

Sharp Lcd TV service mode

How to enter Sharp Lcd TV service mode ?

Sharp Lcd TV service mode

Get into the Sharp Lcd TV service mode

While the Sharp LCD is on, unplug the power cable.
Then while pressing the INPUT & VOL - buttons on the control remote, plug the power cable back into the outlet.
When it powers up you will see a little “k” appear in brackets.
Then on the Sharp TV, press and hold VOL- & CH- down and release.
The Service Menu will be displayed.

To navigate use CH+ CH- buttons, Use VOL+ VOL- buttons to adjust the value.

 

Question about reset Sharp Lcd TV service mode ? leave a comment

Lg Service menu

How to enter Lg Service menu ?

 

Reset Lg service menu

 

Get into the Lg Service menu

Press and Hold OK button on remote as well as Lg TV panel at the same time for a few minutes.

Question about reset Lg Service menu ? leave a message